Filter press & filter plate manufacturer
Filter Press andFilter PlateManufacturer
Chamber and membrane presses, PP and membrane plates, and woven filter cloth — specified together for one duty point, from one factory. Tell us the slurry and we will size the press around it.
- Press range
- Chamber · membrane · plate & frame
- Plate sizes
- 630 – 2000 mm
- Cloth
- PP · PET · PA, cut to plate
- Supply
- Press, plate and cloth together
Product lines
Three lines, one filtration duty
Why BESTCOME
Built for buyers who check the parameters
Most filtration problems start before the press is ordered: a plate that does not match the slurry, or a cloth chosen by habit. Our quoting process starts with the duty sheet.
One supply line
Press, plate and cloth are specified together, so the drainage face and the cloth match the duty instead of being bought separately.
Sized from the duty
Filtration area, plate size and pressure follow your solids load, particle size and cake target — not a fixed catalogue number.
Replacement and OEM
Plates and cloth are supplied for existing presses where dimensions and port layout can be confirmed.
Delivery and spares
Export packing, documentation and a commissioning spare set are planned with the order, not after commissioning.
Industry applications
Find the duty closest to yours
Mining & Tailings
Tailings ponds are constrained and dry stacking needs a firmer cake.
SolutionChemicalChemical & Pigment
Fine particles blind cloth and stretch cycle times.
SolutionTextileTextile & Dyeing
Large sludge volume with low solids content slows every cycle.
SolutionFoodFood & Beverage
Clarification must stay consistent between batches.
SolutionWastewaterMunicipal & Industrial Wastewater
Sludge quality shifts with rainfall and plant load.
SolutionPlatingElectroplating & Metal Finishing
Aggressive chemistry shortens plate and cloth life.
SolutionModels
Press and plate series
Typical configurations are shown on each model page. Final specifications are confirmed on the approved drawing for your duty.
Project scenarios
How the specification comes together
Technical insights
Notes from the sizing desk
Practical comparisons on press type, plate selection and cloth behaviour, written for engineers rather than search engines.
All articles- Filter Press Knowledge28 Oct 20267 min read
Chamber vs Membrane Filter Press: How to Choose
Cake moisture, cycle time and slurry behaviour decide more than price. A practical comparison for plant engineers specifying a new press.
- Plate Selection14 Oct 20265 min read
How to Select Filter Plate Size and Pressure Rating
Plate size affects cycle count, labour and headroom. A short guide to matching size and rating to the duty.
- Plate Selection30 Sept 20266 min read
Filter Cloth Selection: Weave, Permeability and Blinding
Why the same fibre can behave differently on two slurries, and how permeability and weave change the cycle.
Enquiry
Tell us the slurry. We will size the press.
Send flow rate, solids content and target cake moisture. If the duty is new to us, we will ask for a sample before proposing a plate and cloth combination.
- · Sized per duty, with assumptions shown on the quotation
- · Plates and cloth quoted with the press, not after
- · Export packing and spare set planned with the order